Tuesday, 25 November 2014
This tutorial was written by me on 25th of November 2014 any resemblance to other tutorials is a coincidence.
*****
*Supplies*
PTU scrapkit Christmas Cuteness by Kissing Kate here.
Tube SnowKitten by Kajenna here.
Vix_BigMask001 here.
Font Wolgast Script.
***
*Let's Get Started*
File - New - New Image 650x650
Selections - Select All.
Copy PAPER 2 - Paste - Paste Into Selection.
Selections - Select None.
*
Layers - New Mask Layer - From Image
Layers - Merge -  Merge Group
*
Copy FRAME 2 - Paste - Paste As New Layer
Image - Resize 65%

Magic Wand - click inside the frame
Selections - Modify - Expand 10
Copy PAPER 8 - Paste - Paste As New Layer
Selections - Invert - Press the small delete key on your keyboard
or use your Eraser Tool to remove the paper outside of FRAME2
Selections - Select None.
*
As Always you can check my tag for placements
Copy ELEMENT 38 - Paste - Paste As New Layer
I erased the ends of the element 
(wait until you finish adding the other elements to see if you want to do the same)
*
Copy ELEMENT 50 - Paste - Paste As New Layer
Image - Resize 40%
*
Copy ELEMENT 9 - Paste - Paste As New Layer
Image - Rotate 90 Right
Image - Mirror
Image - Resize 80%
*
Copy ELEMENT 64 - Paste - Paste - As New Layer
Image - Resize 50%
*
Copy ELEMENT 47 - Paste - Paste As New Layer
Image - Resize 60%
Place on in front of ELEMENT 64
*
Copy ELEMENT 57 -Paste - Paste As New layer
Image - Resize 40%
Image - Mirror
*
Copy ELEMENT 19 - Paste - Paste As New Layer
*
Copy ELEMENT 52 - Paste - Paste As New layer
Image - Resize 50%
*
Copy ELEMENT 14 - Paste - Paste As New Layer
Image - Resize 35%
*
Copy your tube - Paste - Paste As New Layer
If you are using the same tube as me I resized 20%
*
Add your name & copyright
Layers - Merge - Merge visible
Save as png.

Friday, 21 November 2014
This tutorial was written by me on 21st of November 2014 any resemblance to other tutorials is a coincidence.
*****
*Supplies*
PTU scrapkit Winter Shimmer by Kissing Kate here.
You can buy this kit at Scrap N Company here.
Tube Xmas Baby by Toriya.
You can buy the tube at Scraps N Compant here.
Vix-Val2012Mask2 here.
Font Coneria Script.
***
*Lets Get Started*
File - New - New Image 650x650
Selections - Select All 
Copy PAPER 8 - Paste - Paste Into Selection 
Selections - Select None
Layers - New Mask Layer - From Image
Layers - Merge - Merge Group
*
Copy FRAME 3 - Paste - Paste As New Layer
Image - Resize 90%
Magic Wand - Click inside the frame
Selections - Modify - Expand 10
Copy PAPER 8 - Paste - Paste As New Layer
Selections - Invert
Press the small key on your keyboard to remove the excess paper
(or use your Eraser Tool)
Selections - Select None
Layers - Arrange - Move Down.
*
Elements
ELEMENT 47 - Image - Mirror - Move to the top of frame
ELEMENT 74 - 70% - Image - Mirror - Move to the right of frame
ELEMENT 2 - 50% 
Copy your tube - Paste - Paste As New Layer
Resize to liking and erase the bottom half with Eraser Tool up to the bottom of frame.
ELEMENT 7 - 50% 
ELEMENT 23 
ELEMENT 61 -90% 
ELEMENT 59 - 50% - Image - Mirror
ELEMENT 41 - 60%
ELEMENT 20 - 50%
ELEMENT 5 - 35% - Image - Rotate 20 Left
*
Add your name & copyright
Save as png
Tuesday, 18 November 2014
This tutorial was written by me on 18th of November 2014 any resemblance to other tutorials is a coincidence.
*****
*Supplies*
PTU Scrapkit Dress White by Kissing Kate here
You can buy this kit at Scraps N Company here
Tube by Vi Nina - buy it at  Sraps N Company here
Vix_BigMask001 here
The 2nd mask I'm using is BabesDesignz_Mask15 
 (her blog is no longer online so substitute it with one of your liking or just leave it out)
Font From Me 2 You
***
*Lets Get Started*
File - New - New Image 650x650
Selections - Select All
Copy PAPER 4 - Paste - Paste Into Selections
Selections - Select None
Layers - New Mask Layer - From Image
Find Vix_BigMask001 in the drop down box
Press OK
Layers - Merge - Merge Group
*
If you are using a 2nd mask add a New Raster Layer & repeat the steps above
*
Copy FRAME 1 - Paste - Paste As New Layer -Image - Resize 65%
Magic Wand Tool - Click inside the frame - Selections - Modify - Expand 10
Copy PAPER 10 - Paste - Paste As New Layer
Image - Resize 50%
Selections - Invert - Press the small delete key on your keyboard
(or use your Eraser Tool)
Layers - Arrange - Move Down
*
Copy your close up tube - Paste - Paste As New Layer
Move so that what you want is showing inside the frame
Press the small delete on your keyboard
(or use your Eraser Tool)
Selections - Select None
*
Tube Layer - Layers - Duplicate
On the duplicate tube layer - Adjust - Blur - Gaussian Blur 2
Change the Blend Mode to Screen - Lower Opacity to 60
Change the Blend Mode of the original tube layer to Luminance(Legacy)
*
Move back on to the frame layer so we can add the elements.
Add the following elements.
ELEMENT 8 - 99%
ELEMENT 17 - 70%
ELEMENT 40 - 50% - Image - Rotate - Free Rotate 20 Right
ELEMENT 6 - 70%
ELEMENT 47 - Image - Mirror
ELEMENT 32 - 40%
*
Copy your tube - Paste - Paste As New Image
Image - Resize 40%
Move to the Right of frame - Layers - Duplicate
Adjust - Blur - Gaussian Blur 2 - Change the Blend Mode to Soft Light
Lower the Opacity to 50
*
Add your copyright & Name
Save As png
Monday, 17 November 2014
This tutorial was written by me on 17th of November 2014 any resemblance to other tutorials is a coincidence.
*****
*Supplies*
PTU Scrapkit Let It Snow by Kissing Kate here
You can buy this kit at Scraps N Company here
Tube by Alex_Prihodko - purchase it at PFD here.
Vix_BigMask001 here
Font Janda Celebration Script
***
*Lets Get Started*
As with most of my tutorials we will be working from bottom to top.

File - New - New Image 650x650
Selections - Select All
Copy PAPER 8 - Paste - Paste Into Selection
Selections - Select None

Layers - New Mask Layer - From Image
Layers - Merge - Merge Group
*
Copy FRAME 2 - Paste - Paste As New Layer
Image - Resize 70%
Magic Wand Tool - Click inside the frame
Selection - Modify - Expand 10
Copy PAPER 10 - Paste - Paste As New Layer
Selections - Invert - Press the small delete key on keyboard
Layers - Arrange - Move Down
*
Copy your tube - Paste - Paste As New Layer
Move so that what you want is showing inside the frame - Press the small delete key on keyboard
Selections - Select None
*
Tube Layer
Layers - Duplicate -  On the Duplicated tube layer - Adjust - Blur - Gaussian Blur 2
Change the Blend mode to Screen - Lower Opacity to 64

Original Tube Layer
Adjust - Hue and Saturation - Colorize
*
*Elements*
You can see where each is placed if you refer to my tag.
ELEMENT 62 - Image - Mirror - Image Flip 
ELEMENT 61 - 40%
ELEMENT 41 - Image - Flip
ELEMENT 2 - 70% 
ELEMENT 68 - 70% - Image - Rotate - Free Rotate 90 Right
Image - Mirror - Image - Rotate 10 Right
ELEMENT 34 - 40% - Image - Mirror
ELEMENT 48 - 80% - Image - Rotate - Free Rotate 20 Right
ELEMENT 80 - 40% - Image - Mirror
ELEMENT 12 (I duplicated this layer to make it stand out more)
ELEMENT 68 - 80% - Image - Mirror
ELEMENT 76 - 40%
*
Copy your tube - Paste - Paste As New Layer
Resize & place where you think it looks best.
Add your name & copyright
Save as png
Saturday, 15 November 2014

This tutorial was written by me on 15th of November 2014 any resemblance to other tutorials is a coincidence.
*****
*Supplies*
PTU scrapkit Blushed from Dees'Sign Depot here.
Tube Lipstick by Verymany here.
Vix-Val2012Mask2 here.
Font From Me 2 You
***
*Lets Get Started*
I've written this tut so we will be starting from bottom and working our way to the top.
File - New - New Image 650x650.
Selections - Select All.
Copy DD_Blushed_Paper17 - Paste - Paste Into Selection.
Selections - Select None.
*
Layers - New Mask Layer - From Image.
Click OK.
Layers - Merge - Merge Group.
*
Copy DD_Blushed_Element14 - Paste - Paste As New Layer.
Image - Resize 80%
*
Magic Wand Tool - Click inside the frame.
Selections - Modify - Expand by 10.
Layers - New Raster Layer.
Layers - Arrange - Move Down.
Copy DD_Blushed_Paper17 - Paste - Paste Into Selection.
Copy your close up tube - Paste - Paste As New Layer.
Move it so that what you like showing inside the frame.
Selections Invert - Press the small delete key on your keyboard.
Selections - Select None.
*
On the tube layer 
Layers - Duplicate - Adjust - Blur - Gaussian Blur 2.
Change the Blend Mode of this layer to Soft light.
On the original tube layer change the Blend Mode to Luminance Legacy
Lower the Opacity to 70%.
Layers - Merge - Merge Visible
*
Now we'll add the elements 
Check my tag for placements 
(most stuff is place to the bottom right of the frame)
DD_Blushed_Element59 - 50% 
DD_Blushed_Element60 - 70% - 
DD_Blushed_Element57 - 70% - Image - Rotate - Free Rotate 10 Right.
DD_Blushed_Element36 - 80%
DD_Blushed_Element1 
DD_Blushed_Element38 - Image - Mirror - Image - Rotate - Free Rotate 15 Right
DD_Blushed_Element53 - Image - Mirror - Image - Resize 80%
DD_Blushed_Element9 - 50%
DD_Blushed_Element48 - 30%
DD_Blushed_Element22 - 40%
DD_Blushed_Element4 - 55% - Image - Rotate - Free Rotate 33 Left
*
Copy your tube - Paste - Paste As New Layer
Resize to your liking.
If you are using the same tube as me I resized 50% and Rotated 5 to the Left.
Add your copyright and name.
Save as png
This tutorial was written by me on 6th of November 2014 any resemblance to other tutorials is a coincidence.
*****
*Supplies*
PTU scrapkit Tonya's Gift from Dees'Sign Depot here
Tube Mellie by Verymany here
BflyFlbyMask82 here
Vix_BigMask001 here
Font Wolgast Script
***
*Lets Get Started*
Tube 
OK 1st off if you want the same soft look to you tube as I have on mine follow these steps.
Copy your tube - Paste - Paste As New Image
Layers - Duplicate

Original Tube Layer
Adjust - Hue & Saturation - Colorize
Hue 0 - Saturation 0
Duplicate Tube Layer
Adjust - Blur - Gaussian Blur 2
Change the Blend Mode of this layer to Screen 
Layers - Merge - Merge Visible.

*Now on to the tag*
I've written this tutorial so that we will be working from the bottom to the top

File - New - New Canvas 650x650
Selections - Select All 
Copy Paper_14 - Paste - Paste Into Selection
Selections - Select None
*
Layers - Duplicate
On the bottom paper layer
Layers - New Mask Layer - From Image
Find Vix_BigMask001 in the drop-down box
Layers - Merge - Merge Group
*
On the next paper layer
Layers - New Mask Layer - From Image
Find BflyFlbyMask82 in the drop-down box
Layers - Merge - Merge Group
Image - Resize 85%
*
Copy Frame_4 - Paste - Paste As New Layer
Image - Resize 60%
*
Magic Wand Tool - click inside the frame
Selections - Modify - Expand by 10
Copy Paper_14 - Paste - Paste As New Layer
Selection - Invert 
Press the small delete key on your keyboard
(it should remove any paper outside the frame)
Layers - Arrange - Move Down
*
Copy your close up tube - Paste - Paste As New Layer
(See my tag for placement)
Press the small delete key on your keyboard or use the Eraser tool to remove
any tube outside of the frame.
Selections - Select None
Lower the opacity of the tube layer to 40
Layers - Duplicate 
Change the Blend mode to Screen and move the Opacity back up to 100
(or do what you think looks best)
*
Copy Spray_4 - Paste - Paste As New Layer
Image - Rotate - Free Rotate 90 Right
Place to the left of the frame
I used the Eraser tool to remove part of the top & bottom of this element but you can leave it as is if you prefer.
*
Copy Element_68 - Paste - Paste As New Layer
Image - Resize 70%
Place to the left of the frame
Again I used the Eraser Tool to remove the bit at the bottom of the element
*
Copy the tube we prepared at the start - Paste - Paste As New Layer
Resize to your liking and move slightly to the right.
Use Eraser Tool to remove any of the tube at the bottom of frame
*
Copy Element_35 - Paste - Paste As New Layer
Image - Mirror
Image - Resize 70%
Image - Rotate - Free Rotate 10 Left
Move to the left
*
Copy Element_60 - Paste - Paste As New Layer
Image - Resize 80%
Place at the bottom of the frame
*
Copy Element_63 - Paste - Paste As New Layer
Image - Flip
Image Resize 80%
Move to bottom right of the frame
*
Copy Element_49 - Paste - Paste As New Layer
Image - Rotate 25 Right
Image - Resize 65%
Move to the bottom left of frame
*
Copy Element_9 - Paste - Paste As New Layer
Image - Resize 70%
Move to the bottom left of frame
*
Add your copyright 
Save as png
Monday, 3 November 2014
This tutorial was written by me on 3rd of November 2014 any resemblance to other tutorials is a coincidence.
*****
*Supplies *
PTU scrapkit Tonya's Gift from Dees'Sign Depot here.
Tube by Veryman here.
Mask Vix-Val2012Mask2 by Vix  here.
Font FoglihtenNo04

***
*Lets Start*
File - New - New Image 650x550
Copy Frame_8d - Paste - Paste As New Image
Image - Resize 70%
*
Magic Wand Tool - click inside the frame
Selections - Modify - Expand 10
*
Copy Paper 14 - Paste - Paste As New Layer
Selections - Invert - Press the small delete key (removes paper outside of frame)
Layers - Arrange - Move Down
*
Copy your close up tube - Paste As New Layer
Press the small delete key
Selections - Select None

Duplicate the tube layer
On the duplicate - Adjust - Blur - Gaussian Blur 2
Change the Blend mode of this layer to Screen 

Original tube layer
Change the Blend mode to Luminance(Legacy)
Lower the opacity to 62%
*
Back on Frame
  (which should be the top layer)
Copy your tube - Paste - Paste As New layer 
I resized mine 56%
I added my tube now so I could place the elements around it.
*
Now I'll tell you what elements I used and how I resized them 
& you can check my tag for placements.

Element_68 - 70% 

Spray_5

Element_38b - 60%

Element_21- 70%
Image - Free Rotate 20 Right

Element_48 - Rotate 5 right

Element_39 - 50%

Element_53a - 60%

Element_9 - 50%

Element_63 -  Resize 80%
(I erased the stem but you can leave it if you like)

Element_33 - 70%

Element_44a - 40%

*
If your tube layer isn't your top layer now is the time to move it.
Click on your tube layer - Layers - Arrange - Bring to Top.

*
If you want to soften your tube like mine 
Duplicate the tube - on the duplicate - Adjust - Blur - Gaussian Blur 2
Change the Blend Mode to Screen & Lower the Opacity to 44%
Layers - Merge - Merge Visible

*
Now to add the mask.
Image - Canvas Size 650x650

Layers - New Raster Layer
Selections - Select All
Copy Paper_14 - Paste - Paste Into Selection
Selections - Select None

Layers - Arrange - Send to Bottom

Layers - New Mask Layer - From Image
Find your mask in the drop down box 
Layers - Merge - Merge Visible

I deleted the bottom half of the mask
Then - Layers - Duplicate
Image - Mirror - Image - Flip
Layers - Merge - Merge Visible

*
Add your copyright & name
Save as png

I CT For

 photo ChichiDesignz_zpsrorkziqk.gif  photo safe_image 1_zps6rjmwvxa.gif  photo Tashablinkieballoon_zps8wvaaevu.gif Gothic Inspirations  photo patty2_bybrandi1_zpsuuwnm50l.gif

Blog Archive